Colors according to customer requirements 
 Brand good Hurley 
 Order the amount of 50kg 
 The total solid content ≥ - (%) 
 Shelf life of 12 (months) 
 Products: acrylic paint orange-peel, dried orange-peel paint 
 Product features: the appearance of new, clear orange-peel, realistic, fast drying, hardness, and firmly attached 
 Scope of application: printing and dyeing machinery, textile machinery, plastics machinery, CNC machine tools, safes, woodworking machinery, printing machinery, chemical machinery, equipment, hardware tools and other high-end products on the surface decoration 
 Second, the construction process 
 1, paint Stir well before using; 
 2, acrylic orange-peel primer: curing agent S-2 = (3-4): 1; acrylic orange-peel paint: S-2 = 3:1; 
 Dried orange-peel paint baking constant temperature of 120 ° C for 30-50 minutes (baking naturally at room temperature before leveling more than 30 minutes); 
 4, self-forming orange-peel paint pattern is too large, special additives of the Company available to pattern small; 
 5, the construction of the paint viscosity is too high, special diluent can be added to the hammer to be adjusted. 
 Ⅰ, forming orange-peel paint construction process is as follows: (the paint, two paint acrylic orange-peel primer and acrylic orange-peel paint used in conjunction with); 
 A. Two spraying methods, first paint the same color acrylic orange-peel primer base construction viscosity (Tu 4 cup) ,18-22 seconds / 25 degrees. The use of thin spray to cover the substrate can be, do not spray too thick; 
 B. The first spray paint for 30 minutes, until paint is dry before the second paint spray application viscosity as early 25-35/25 (Tu 4 cup). Commonly used in spray method can be. 
 C. Suggested the use of caliber as the gun more than 2mm. 
 II, the burst type of orange-peel paint construction process is as follows: 
 A. Spraying two times, first base, paint construction generally 18-22 seconds / 25 degrees, Tu 4 cup. Do not have to spray too thick to cover the substrate can be; 
 B. Spray finished the first pass the paint is dry after 30 minutes before the second pass of paint spraying; 
 C. For the surface is slightly smaller flat, orange-peel effect, the application viscosity of 60-90 sec / 25 degrees, Tu 4 cup. The selection of a diameter of 1.5mm-2.0mm spray gun, spray gun and workpiece distance 30-40CM, secondary to the three thin spray should not be a one-time spraying too thick, pressure of 5-7 kg. 
 D. For more information about the shape of large orange-peel, the construction of the second over the paint viscosity is generally more than 90 seconds (the original paint without thinner). Selection of a diameter of 2.5mm-3.0mm spray gun, spray gun and workpiece distance 30-50CM, using the second to three thin spray should not be a one-time spraying too thick, pressure of 4-6 kg. 

 Third, the construction Note: 
 A. Orange-peel paint be used up within 4-8 hours after adding curing agent, in order to avoid plastic waste; 
 Two. This product should be set to a well-ventilated, cool dry place. This product production date to see the barrel label, shelf life of one year.