Color according to customer color 
 Brand good Hurley 
 Order the amount of 1000kg 
 The total solid content of ≥ 45 (%) 
 Shelf life of 12 (months) 

 Aluminum for paint instructions for use 

 Products 
 Acrylic (aluminum only). 

 Product Features 
 Fast drying, high hardness, firmly attached to specific pump design. 

 Scope of application 
 Mechanical and electrical pumps; printing and dyeing machinery, textile machinery, plastics machinery, CNC machine tools, woodworking machinery, printing equipment, chemical machinery, equipment, hardware tools and other high-end products of surface decoration. 

 Construction rules 
 Work environment, equipment requirements, and the coated surface processing requirements: 
 ① spray environment purification device has a good exhaust to. 

 The ② compressed air should be oil-water separation processes, in order to ensure the quality of the gas used by the spray. 

 (3) suggested the use of the caliber of about 1.5-2.0 mm gun, the construction is completed, the gun should be cleaned. 

 The ④ workpiece surface to be coated should be dry, smooth and free of grease, rust, oxide, dust and other. 

 Ratio Construction viscosity: 

 A black primer: the S-2 curing agent = 3:1; application viscosity :25-30 seconds / Tu 4 cup more than 25 degrees; 

 Construction Viscosity :30-35 seconds / Tu 4 cup, less than 25 degrees; 

 2: S-2 of the colored finish curing agent = 3:1; construction Viscosity :30-35 seconds / Tu 4 cup more than 25 degrees; 

 Construction Viscosity :35-40 seconds / Tu 4 cup, 25 degrees below; 

 Construction requirements: 

 1, the flow pressure value :10-15 

 2, the diaphragm value: 20 barometric pressure value :45-55 

 3, conductive paint value: 35 

 Drying conditions: 

 1, the primer wire-speed: 1600 rpm baking temperature: 140 degrees Baking time: 18 minutes 

 2, the finish wire-speed: 1000 rpm baking temperature: 120 degrees Baking time: 34 minutes 

 Note: 
 Prior to use, paint must be thoroughly Stir. 
 2, paint application viscosity must use coated 4 cup measurement. 
 3, must be weighed on electronic scale painting and curing agent. 

 Dear customer: First of all thank you for using our products! Instructions for use are provided free of charge, use of our products, customer product requirements are different, painted steel of different construction methods and in different environments, so the customers to be flexible when used , the present note is for information purposes only and construction reference and does not constitute the Company be liable for warranties and representations. 

 Of the unknown, please call Customer Service Tel :0519 -83,258,811. The Company to amend product specifications without notice.