Brand good Hurley 
 Classification of the metal coating acrylic single component 
 Golden color 
 Drying time ≤ 24 (h) 
 Shelf life of 24 (months) 

 Iron construction elements: 

 A workpiece processing: the surface with the method of pickling, sand blasting, grinding, rust, petrol or other solvents to remove oil, and then the strong air jet or other methods of dust to the surface is dry and free of oil, rust, dust, and so on. 

 Second, anti-rust: 

 1 Stir well before using the original paint, to avoid the emergence of hiding poor; 

 2, suitable for construction of temperature and relative humidity around 25 ℃, 50-70%; 

 3, the spraying viscosity (Tu 4 cup at 25 ° C) 16-20S; 

 4, the spray distance of 20-30cm; 

 5, spray pressure 3-8kg/cm2; 

 12 hours of drying time (25 ° C); 

 7, thinner, use the special diluent. 

 Third, the primer: 

 1 Stir before using the original paint, to avoid color, hiding power, poor; 

 2, suitable for construction of temperature and relative humidity around 25 ℃, 50-70%; 

 3, the spraying viscosity (Tu 4 cup at 25 ° C) 16-18S; 

 4, spray distance of 20-30 cm; 

 5, the spray pressure of 3-8 kg / cm2 or so; 

 12 hours of drying time (25 ° C); 

 7, the proportion of primer and curing agent for the paint: curing agent S-2 = (2-3): 1; 

 8, the thinner selection of our property and the two-component metal paint thinner; 

 9, the primer should be multiple thin spray should not be a one-time spraying too thick; 

 10 by adding the hardener of the paint should be used up within 4-8 hours, so that the gel waste. 

 Finish (powder paint): 

 1 Stir before using the original paint; 

 2, brushing viscosity (Tu 4 cup at 25 ° C) 40S or so; 

 3, the brush when the brush lightly, even; 

 4, the natural drying time of 12 hours. 

 , Clear golden oil: 

 1 Stir before using the original paint; 

 2, suitable for construction of temperature and relative humidity 25 ° C 50-70%; 

 Spraying viscosity (Tu 4 cup, 25 ° C) 14-16S; 

 4, the spray distance of 20-30cm; 

 5, spray air pressure of 3-8 kg / cm2; 

 6, the thinner selection of our property and the two-component metal paint thinner; 

 7, using the proportion of paint for paint and curing agent: curing agent S-2 = (2-3): 1; 

 8, the varnish of the workpiece need primer, topcoat hard work (25 ° C 24 hours) before construction; 

 9, by adding the hardener of the paint should be used up within 4-8 hours, so that the gel waste.