Brand good Hurley 
 Classification of the metal coating acrylic bicomponent 
 Color colored drying time ≤ 24 (h) 
 Water resistance, good shelf life of 24 (months) 

 Flowering series hammer paint instructions for use 
 Product range 
 Acrylic dual dry hammer paint, flowering type dry hammer paint, bump hammer finish 

 Product Features 
 The hammer is clear, stereoscopic, attached to a solid, fast dry, you can compensate for the uneven surface of the product defect. 

 Scope of application 
 Deceleration, motor pumps, fans, security doors, hardware and tools, textile machinery, safes, plastic machinery, printing machinery and other industries. 

 Construction rules 
 Processing requirements of a working environment, equipment requirements, and is painted surfaces: 

 Spray environment purification, with good ventilation to device, and storage of construction dust flying environment; 

 , Compressed air should be oil-water separation and effective treatment, to ensure that the gas quality; 

 3, suggest that the choice of caliber of the gun in about 1.5-2.0mm, the completion of construction shall be cleaned; 

 4, coating the surface should be dry, smooth, no oil, rust, oxide, dust, spray primer on the surface of the topcoat spray. 

 Second, the construction process: 

 Pre-construction, paint mixing shall be uniform; 

 2, the optimal construction of temperature and relative humidity 25 ° C 50-70%; 

 , Spraying viscosity (Tu 4 cup at 25 ° C) 20s-25s; 

 4, spray air pressure 4-6kg / c ㎡; 

 5, acrylic (polyester) Dual dry hammer paint: curing agent S-2 = 4:1, 

 Flowering type dry hammer paint: curing agent S-2 = 3:1; 

 6, pattern paint must be added to the hammer paint thinner; 

 Bump hammer paint should be carried out constant temperature of 120 ℃ bake for 40-60 minutes, baking at room temperature over 30 minutes of dirty flat. 

 Third, the construction Note: 

 1, before the spray application filter filter has deployed a good paint; 

 Go gun, spraying should be uniform, so as not to tread sometimes big, sometimes small, and too much could easily lead to sagging; 

 3, hammer paint pattern is too large, you can use the special additives pattern of tone; 

 4, by adding the hardener of the paint should be used up within 4-8 hours, in order to avoid plastic waste; 

 5, the product should be placed in well-ventilated, cool dry place; 

 6, the production date see the barrel label, shelf life of one year. 

 Dear customer: First of all thank you for using our products! Instructions for use are provided free of charge, use of our products, customer product requirements are different, painted steel of different construction methods and in different environments, so customers 

 To be flexible when used, the only construction reference and does not constitute warranties and representations of the Company be liable for. 

 Unknown, call the customer service phone 519 -83,258,822, the Company revised product specifications without notice.